![]() Copy ALL files from folder C:\Siemens\SinuTrain\SINUMERIK CNC-SW 840D sl 4.7 SP3 HF1\hmi\siemens\sinumerik\hmi\template\cfg\miniweb\ to folder C:\Siemens\SinuTrain\SINUMERIK CNC-SW 840D sl 4.7 SP3 HF1\hmi\user\sinumerik\hmi\miniweb\cfg\ Open UAApplication.xml with a text editor and replace all localhost entries in this file with the IPv4 address of your PC. Click - > -, enter OPC, activate the license and click. Lathe with driven tool, it is recommended NOT to use the DEMO-Lathe device. Start SinuTrain and create one new machine f.i. ![]() If you accept all default settings you are able to use the paths mentioned below. Download and install SinuTrain for SINUMERIK Operate V4.7 Ed.2 - Basic. You have to register a free account to be able to download the program. CONTROLLER SETUP (SINUTRAIN) OPC UA setup on the free version of SinuTrain for SINUMERIK Operate V4.7 Ed.2 differs a bit from the procedure on a real controller but exactly works in the same way. \siemens\sinumerik\hmi\template\cfg\miniweb\ Restart the controller. If files are missing, copy them to this directory from. \user\sinumerik\hmi\miniweb\cfg\: AddressModeller.xml, OPC_UAApplication.xml, SinumerikOemConfiguration.xml and TraceConfig.xml. of 10ģ Make sure that the following files are in folder. \siemens\sinumerik\hmi\miniweb\system\ and verify that it contains file UserDataBase.xml. With Windows Explorer navigate to folder. Important note: Please ensure that the date and time on your HMI is correct, otherwise certificate based OPC UA authentication does not work! Shut down the controller and start it in service mode without HMI. For testing it is also recommended to use OpcUaClient. Enter and confirm the password for this user (3). Enter 4840 in field Port (2) Enter a username for the Administrator (2) of the OPC UA server on the controller, for testing it is recommended to use OpcUaClient. 2 Start the OPC UA configuration in area ->-> FIG 2: Configure OPC UA IP Address is automatically set according to the HMI configuration, -X130 for NCU and PPU Local Area Connection 2 for PCU 50.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |